If you would like to use a VENTRY propeller on a fan other than ours, please read this page!
VENTRY propellers are available in either 20-inch or 24-inch lengths. Propellers cost is $270 each. If you need the aluminum hub and hardware, that adds $78.31. Click here for shipping.
VENTRY Propellers produce a great deal of thrust. If your fan is not designed to handle the thrust, it will tip over with our blade on it. The outward curving, asymmetrical legs on VENTRY Fans are designed to handle the thrust produced by the propellers.
Technical points about VENTRY Propellers.
When in use, any fan on which a VENTRY Propeller is used must allow for at least 6 inches of clearance between the ground and the propeller tips.
VENTRY Fan propellers have a four-bolt pattern with 2-9/16" bolt centers (distance measured between opposite bolts across the center of the prop).
The motor to which you connect the propeller must have a straight shaft and a 3/16" key.
If your fan meets the above requirements, please give us a call.
