VENTRY.com > Fans > Specs > Model 20GX160
VENTRY® Positive Pressure Ventilation Fan
SPECIFICATIONS FOR MODEL V20GX160
VENTRY 20-inch Honda GX160
FEATURES
The base model includes:
- Smoke-Busting Safety Propeller (fail-safe, two-blade, aircraft style wood-Kevlar-fiberglass composite)
- Extendable tripod-like steel Frame/Legs to adjust independently and straddle obstacles for stable operation on uneven terrain
- Heavy-duty reinforced free-flowing guard for maximum air supply to propeller
- Infinite adjustment angles and up to 20 degree tilt
- Dual 7-handles for one- and two-person carry
The following are optional on this model:
- Point of Entry Safety Light
- Solid Rubber Wheels & Stair Skids
- Spark Arrester
- Tachometer/Hour Meter
- Filtered Misting Ring Kit
- Ultimate Door Stop (1 included free)
OUTPUT
Volume - with Legs Extended |
Coming soon (Please call if you need this right away.) |
Volume - with Legs Retracted |
|
Thrust |
|
CO level (at equilibrium and full throttle) |
DIMENSIONS
With Legs Extended |
With Legs Retracted |
Height: 43.5 inches |
Height: 23.5 inches |
Width: 36.0 inches |
Width: 23.5 inches |
Depth: 35.5 inches |
Depth: 20.5 inches |
Dimensions and weights shown do not include any options.
WEIGHT
Dry (no fuel or oil) |
64 Lbs |
Wet (with fuel and oil) |
71 Lbs |
ENGINE SPECS
Motor |
Honda GX160 |
Horsepower / HP |
|
Low Oil Shut-Off |
Yes |
Fuel Capacity |
3.3 qts |
Fuel Endurance |
2.0 hrs |
WARRANTIES
Engine Warranty |
3 years |
Workmanship and Materials |
5 years |
MANUFACTURER
Business |
Ventry Solutions, Inc. |
Address |
14128 N Hauser Lake Rd |
Phone |
(888) 257-8967 (208) 773-1194 |
Fax |
(208) 777-0360 |
BID SPECIFICATIONS
Fan shall have a 20-inch, two-blade, aircraft-style safety propeller consisting of a wood core with a fiberglass and Kevlar® pressure-bonded full wrap sheath and a minimum of three layers of .01 inch fiberglass on the leading edge.
Fan shall be capable of rising at least 14 inches above the ground in order to allow aiming of the air stream over obstacles such as residential entry steps.
Fan shall be able to be placed on stairs or uneven ground and shall be capable of straddling 12-inch high ground debris.
Fan shall be gasoline powered and equipped with a Honda GX-series motor.
Fan shall have a tripod frame with three independently extendable, adjustable legs.
Fan shall be capable of fitting in a 24-inch high by 24 inch wide x 22 inch deep compartment.
Fan shall have a wet (full fuel and oil) weight of 64 pounds or less, not including options.
Fan’s full throttle un-governed engine speed shall not exceed the engine manufacture’s redline (4,000 RPM).
Fan air stream shall not exceed OSHA exposure recommendations of 50 PPM carbon monoxide content.
Fan shall produce at least 16,000 CFM verified by a thrust value of 12 pounds or more.
Fan noise level shall not exceed 95 dB measured from 4 feet behind the fan at full throttle.
Fan shall have a free-flowing wire guard which excludes objects larger than a 1/2-inch probe.
Fan shall be available with the following optional components:
- Spark Arrester to meet National Park requirements for combustion engines.
- Digital Tiny Tach™ combination tachometer and hour meter which tracks RPM and total hours.
- Wheels/Skids. This is one option which includes two transparent polyurethane wheels with ABEC-5 bearings, a powder-coated steel tow handle which goes up and down from the center of the fan, and stair skids for going up and down curbs and stairs easily.
- Articulated Top Safety Light of 50 watts, which is water resistant, self-contained, and able to aim in multiple directions. The light must be powered by the fan engine, feature an on/off switch, and fold down when not in use.
- Low-pressure water Misting Ring Kit with a flushable 22-micron filter and four adjustable nozzles. The Misting Ring Kit can operate at pressures up to 200 psi.
VENTRY.com > Fans > Specs > Model 20GX160