VENTRY.com > Fans > Specs > Model 24GC160
VENTRY Positive Pressure Ventilation Fan
SPECIFICATIONS FOR MODEL 24GC160
24-inch Honda GC160
FEATURES
| Aircraft Style Safety Propeller | Standard |
| Extendable Tripod Frame/Legs | Standard |
| Spark Arrester | Optional |
| Tachometer/Hour Meter | Optional |
| Misting Ring Kit | Optional |
| Ultimate Door Stop | One included; extras optional |
OUTPUT
Volume - with Legs Extended |
23,800 CFM |
40436 m^3/hr |
Volume - with Legs Retracted |
23,600 CFM |
40097 m^3/hr |
Thrust |
19.7 Lbs |
|
CO level (at equilibrium and full throttle) |
30 PPM |
DIMENSIONS
| With Legs Extended | With Legs Retracted |
Height: 43.5 inches |
Height: 28 inches |
Width: 35.5 inches |
Width: 27 inches |
Depth: 35 inches |
Depth: 21.75 inches |
Dimensions and weights shown include only standard options.
Measurements can vary +/- 1/2 inch due to normal fluctuations in manufacturing.
WEIGHT
Dry (no fuel or oil) |
66 Lbs |
Wet (with fuel and oil) |
70 Lbs |
ENGINE SPECS
Motor |
Honda GC160 |
Horsepower / HP |
|
Low Oil Shut-Off |
No |
Fuel Capacity |
1.9 qts |
Fuel Endurance |
1.5 hrs |
WARRANTIES
Engine Warranty |
3 months |
Workmanship and Materials |
5 years |
MANUFACTURER
Business |
Ventry Solutions, Inc. |
Address |
14128 N Hauser Lake Rd |
Phone |
(888) 257-8967 (208) 773-1194 |
Fax |
(208) 777-0360 |
BID SPECIFICATIONS FOR VENTRY FAN 20GC160
- Fan shall have a fail-safe 24-inch, two-blade, aircraft-style propeller consisting of a vibration-dampening wood core with pressure-bonded, quadruple-layer fiberglass and Kevlar® outer structure.
- Fan shall have a tripod frame with three independently extendible, adjustable legs, making it capable of rising at least 14 inches above the ground in order to allow aiming of the air stream over obstacles such as residential entry steps.
- Fan shall be able to be placed on stairs or uneven ground and shall be capable of straddling 12-inch high ground debris.
- Fan shall be gasoline powered and equipped with a Honda 4.6 hp* GC160 motor.
- Fan shall be capable of fitting in a compartment measuring 29 inches high x 28 inches wide x 23 inches deep before options are added.
- Fan shall weigh less than 67 pounds before fuel, oil or options are added.
- Fan’s full-throttle ungoverned engine speed shall not exceed the engine manufacture’s redline of 4,000 RPM.
- Fan air stream shall not exceed OSHA exposure recommendations of 50 PPM Carbon Monoxide content.
- Fan shall produce at least 23,000 CFM verified by a thrust value of 19 pounds or more.
- Fan noise level shall not exceed 95 dB measured from 4 feet behind the fan at full throttle.
- Fan shall have a free-flowing wire guard which excludes objects larger than a 1/2-inch probe.
- Fan engine shall be covered under Honda’s commercial warranty of three months and all other components shall be covered by manufacturer’s five-year warranty.
- Fan shall come with one Ultimate Door Stop which can be used in at least four different ways to hold a door open at a 90° angle.
- Fan shall be available with the following optional components:
- Spark Arrester to meet National Park/Forest requirements.
- Digital Tiny Tach™ combination tachometer and hour meter which tracks RPM and total hours.
- Low-pressure water Misting Ring Kit with a flushable 22-micron filter and four adjustable nozzles. The Misting Ring Kit must operate at pressures up to 200 psi.
*The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 RPM.
VENTRY.com > Fans > Specs > Model 24GC160