VENTRY.com > Fans > Specs > Model 24LP

Print

Ventry All-Terrain Fans

VENTRY Positive Pressure Ventilation Fan
SPECIFICATIONS FOR MODEL 24LP
24-inch Propane-Powered Honda GX200


FEATURES

Aircraft Style Safety Propeller Standard
Extendable Tripod Frame/Legs Standard
Tachometer/Hour Meter Standard

Large Pneumatic Wheels

Standard
Entry Point Safety Light Standard
Misting Ring Kit Optional
Ultimate Door Stop One included;
extras optional

OUTPUT

Volume - with Legs Extended

22,000 CFM

Volume - with Legs Retracted

21,500 CFM

Thrust

18 Lbs

CO level (at equilibrium and full throttle)

00.7 PPM


DIMENSIONS

With Legs Extended
LP Fan with legs extended

With Legs Retracted
LP Fan with legs retracted

Height: 43.5 inches

Height: 28 inches

Width: 35.5 inches

Width: 30 inches

Depth: 35 inches

Depth: 25.75 inches

Dimensions and weights shown include only standard options.
Measurements can vary +/- 1/2 inch due to normal fluctuations in manufacturing.


WEIGHT

Dry (no propane or oil)

107 Lbs

Wet (with propane and oil)

122 Lbs


ENGINE SPECS

Motor Honda GX200

Horsepower / HP

approximately 4.7 HP

Low Oil Shut-Off

Yes

Propane Capacity

3.3 gallons of LP

Propane Endurance

5+ hrs


WARRANTIES

Engine Warranty

1 year or 100 hrs

Workmanship and Materials

5 years


MANUFACTURER

Business

Ventry Solutions, Inc.

Address

14128 N Hauser Lake Rd
Hauser, ID 83854

Phone
(888) 257-8967
(208) 773-1194
Fax
(208) 777-0360

BID SPECIFICATIONS FOR VENTRY PROPANE FAN 20LP

  1. Fan shall have a fail-safe 24-inch, two-blade, aircraft-style propeller consisting of a vibration-dampening wood core with pressure-bonded, quadruple-layer fiberglass and Kevlar® outer structure.
  2. Fan shall have a tripod frame with three independently extendible, adjustable legs, making it capable of rising at least 14 inches above the ground in order to allow aiming of the air stream over obstacles such as residential entry steps.
  3. Fan shall be able to be placed on stairs or uneven ground and shall be capable of straddling 12-inch high ground debris.
  4. Fan shall be propane powered and equipped with a Honda GX200 motor (rated approximately 4.7 hp).
  5. Fan shall be capable of fitting in a compartment measuring 29 inches high by 31 inches wide x 27 inches deep before options are added.
  6. Fan shall weigh less than 108 pounds before fuel, oil or options are added.
  7. Fan’s full-throttle ungoverned engine speed shall not exceed the engine manufacture’s redline of 4,000 RPM.
  8. Fan air stream shall not exceed OSHA exposure recommendations of 50 PPM Carbon Monoxide content.
  9. Fan shall produce at least 22,000 CFM verified by a thrust value of 18 pounds or more.
  10. Fan noise level shall not exceed 95 dB measured from 4 feet behind the fan at full throttle.
  11. Fan shall have a free-flowing wire guard which excludes objects larger than a 1/2-inch probe.
  12. Fan engine shall be covered by Ventry Solutions, Inc. for twelve months or 100 hours; all other components shall be covered by manufacturer’s five-year warranty.
  13. Fan shall come with Large Pneumatic Tires that are air-filled and measure over 8 inches in diameter and a handle that moves straight up and down from the center of the fan.
  14. Fan shall come with a Safety Light that is self contained, water resistant, powered by a small generator in specifically equipped Honda GX-Series engines, and contains a 100 watt bulb that can be turned on and off when needed.
  15. Fan shall come with a Digital Tiny Tach™ combination tachometer and hour meter which tracks RPM and total hours.
  16. Fan shall come with one Ultimate Door Stop which can be used in at least four different ways to hold a door open at a 90° angle.
  17. Fan shall be available with the optional low-pressure water Misting Ring Kit with a flushable 22-micron filter and four adjustable nozzles. The Misting Ring Kit must operate at pressures up to 200 psi.

VENTRY.com > Fans > Specs > Model 24LP

Print

Top of page