The chart above shows LENTRY Lights are brighter and use less power than other lights. Click the image to enlarge.
The chart above shows which generator you will need to power each light or light combination. Click the image to enlarge.
All of our polelights are exclusive to Ventry Solutions, Inc. for use in all-terrain LENTRY Units. They are high quality, rugged, and designed to withstand the rigors demanded by the fire service while providing very bright, useful light for precise work or large areas. LENTRY® Light Systems are deployed for rescue, emergencies, disasters, recovery...
Each link goes to a whole page with details. Click here for photos of each light head.
The ability of LENTRY Systems’ polelights to articulate, rotate, and telescope up and down is crucial for large scene and distance lighting, greatly increasing function and value with little additional cost.
There are five polelights from which to choose. Every aspect—from the shapes and surfaces of the lampheads to the knobs, poles, and protective guards—has been optimized for quality, durability and adaptability.
The most beneficial quality of all of our polelights—both the halogens and LEDs—is that they are extremely efficient and very, very bright, using minimal power.
High output-to-power ratios represent the best value to our customers, which is why we offer the specific LEDs and halogen bulbs we do. Other halogen bulbs are not offered because 500, 750 and 1000 watt bulbs would provide less light and use more energy than those we offer.
Our 650W ABC and 650W FRC polelights use Hi-IR halogen bulbs, with output of 25,000 lumens. This special 650 watt bulb is utilized in all halogen LENTRY polelights except the 1500W ABC. (It is used in all 650W ABC and FRC lights and the 2-Headed 1300W XT). These bulbs output 21% more light than 1000 watt halogens and more than twice the lumens of 500 watt halogens, as shown in the chart at left. Hi-IR bulbs (short for high-Infrared) provide all the benefits of standard halogen bulbs and operate more efficiently. An IR (infrared) coating is applied to the filament tube. This multi-layer coating redirects heat (infrared light) back on to the filament to produce more light without using additional energy. The amount of heat generated is reduced and the light is whiter than a standard halogen bulb.
The two new LEDs have similar lumens rating to the Hi-IR bulbs (20,000 lumens each!) yet require only 240 watts to run. This means that either generator can power multiple LED polelights for hours and still have power to spare! Even the small EU1000i Honda generator, rated 900W, can run four LEDs at a time! Ask us if you are interested and we will make it happen.
When choosing LENTRY polelights, you get to choose the height! Almost all of our telescoping polelights are available in either standard height or extra tall XT height. The light heads do not disconnect from the poles. See our page about Height (in the Specs section) for more info.
The generator you need depends on which light or lights you choose. For a chart showing what the power requirements for all lights and light combinations available on LENTRY Light Systems, click here.
LENTRY System Polelights are manufactured exclusively for Ventry Solutions, Inc. by our partners Akron Brass Company (ABC) and Fire Research Corporation (FRC). These Polelights have been engineered and optimized per our specifications for use with LENTRY Light Systems with modifications to the bulbs, wiring configurations, knuckles, poles, knobs, switches, guards and more. Polelights not sourced from Ventry Solutions will have different hardware, vary in overall design/ construction, have different warranties and will not match the specifications shown here.