Digital Tachometer and Hour Meter
Part number T-1031

Optional with all the generators used on LENTRY Systems, the digital Tiny Tach™ displays RPM and total hours. It is helpful for performance report, maintenance and diagnostics.

LENTRY Polelight Truck-Mount Option
Part number PLMT-RING

Telescoping extra tall XT polelights from LENTRY units can serve double-duty as truck-mounted lighting with the addition of the Polelight Truck-Mount Option. This option includes a four-piece set of interlocking brackets and rings (pictured at right). The rings are installed on the shaft of the XT polelight (two rings per polelight) and the two brackets (portions with plungers) are mounted on a vertical surface, for example, the inside or outside of a truck cabinet or the side of a trailer.

The brackets have plunger mechanisms which hold the rings and, therefore, the lights, securely in place on the truck. On the truck, the telescoping XT polelight can then be utilized by plugging it in to an on-board generator or to the three-legged LENTRY generator set up nearby. When the light is needed remotely, the polelight is easily detached and ready for use with the LENTRY system. Ideal for exterior applications.

LENTRY Over-the-Shoulder Carrying Strap
Part number L-1003

Over-the-shoulder carrying strap, hand-made of strong nylon for easy one-person transport of LENTRY units with EU1000i generators only. Optional with EU1000i combinations only.
Not available on EU2000i models.

[At left, the Shoulder Strap is shown in use with a single standard height EU1000i LENTRY Unit]

Extra Feet - Rubber Leg Ends
Part number: F296600

These fit VENTRY Fans and LENTRY Frames/Legs

[Photo: Rubber leg end shown at left]

Extra Bulbs

Extra light bulbs are wise to keep on hand for backup in the field. All LENTRY Units utilize one or more of the following bulbs. Click here for pictures of the lights we offer.

650W Hi-Infrared Bulb
Part number: FCM-HIRQ-650-T3

650W bulbs are used in and recommended for all LENTRY Lights -- except those having one long 1500W bulb. This bulb can be used in LENTRY lights that originally came with 650W or 750W bulbs, and either the original housing or the new/current housing. It is the brightest bulb we can get using only 650 watts of power. Approximately 5 inches long. Output of 25,000 lumens.

[These bulbs are used in fixed, standard and extra tall 650W LENTRY Lights, and 2-headed XT lights (shown at left). They are not used in 1500W lights.]

750W Halogen Bulb
Part number: Q750T3-4CL

For a short time during 2010, 750W bulbs were used in most LENTRY Lights instead of the 650W bulb. They are still a good bulb to use as a backup because they are slightly less expensive. They are interchangeable with the 650W Hi-IR Bulbs shown above. The 750W bulb may be used in all LENTRY Lights except those with one long 1500W bulb. Approximately 5 inches long. Output of 21,000 lumens.

[750W and 650W bulbs are interchangeable, but the 650W bulbs are brighter.]

1500W Halogen Bulb
Part number: AQ1500-110CL-T3

Replacement or backup halogen bulb for LENTRY System Pole Lights. Approximately 10 inches long. Bulb output is 35,000 lumens.

[These bulbs are used in the 1500W Light shown at left, standard and extra tall]

A few other LENTRY accessories/options are available but we are unable to show them here, including a DC charging cable and parallel operation cables. For information on those, please see the LENTRY Sales Flyer which details all options available.