|


Already own a VENTRY Fan or LENTRY Light System? Contact us for your Free sticker upgrade. |
LENTRY SPECIFICATIONS
For additional measurements not found on this page, please call and we will try to get them for you. The info on this page does reflects the new housing (ABC 650W lights), where appropriate. HOWEVER, NEW FRC 650W AND FRC LED LIGHTS ARE NOT YET SHOWN.
On this page...
|
|
|
|
LIGHT MOUNTING AND STORAGE CONFIGURATIONS
Polelights may be disconnected for transport and storage. This leaves the Generator, Frame (also called Legs), and Light Base together.
Units with standard height lights (the short ones) are often stored as is, without separating the light from the Generator-Frame-Base while LENTRY units with dual and XT lights are usually stored with the light(s) removed. |
| |
|
|

|
|
 |
|
 |
| |
|
|
| Above, the light has just been disconnected from the light base. Unit shown has an EU1000i generator and standard height 650W light. Click the photo to enlarge. |
|
Units shown in the middle and upper right picture have an EU2000i generator, dual light base, one standard height 650W light and one 650W XT light. Click the photos to enlarge. They show the lights disconnected in one photo and left connected in the other. |
DIMENSIONS
HEIGHT OF COMPLETE UNITS
Fully extended, with both legs and lights out as far as they go, LENTRY Systems with the...
...extra tall XT lights stand 8 to 8.5 feet tall. With the XT light NOT fully extended, it is still about 5.5 feet tall (middle image). For scale, Doug is 5 foot 8 inches, pictured below.
|
 |
...fixed light stand 44 inches tall; |
...standard height lights stand about 53 inches tall; |
 |
 |
COMPLETE UNITS - DIMENSIONS
High x Wide x Deep (Units = Inches)
Only the three most common configurations, using standard height lights, are shown here. For additional dimensions, please see further down the page or call us. |
|
|
Config A |
Config B |
| EU1000i LENTRY with single standard 650W Light (pictured) |
27.5 x 13.5 x 25.5 |
20 x 13.5 x 32 |
| EU2000i LENTRY with single standard 650W Light |
28 x 14.75 x 28.25 |
21 x 14.75 x 34.5 |
| EU2000i
LENTRY with single standard 1500W Light |
27.5 x 16.5 x 28.25 |
21 x 16.5 x 36.5 |
| DIMENSIONS - NO LIGHT (GENERATOR, FRAME, LIGHT BASE ONLY) |
Below are storage dimensions of the Generator, Legs and Light Base only, with the light or lights disconnected. Dimensions are with legs retracted as shown at right. Note that the dimensions below include the Single Light Base mounted on the front (it can also go on the side) or the Dual Light Base (which sticks out the sides). An EU1000i and an EU2000i, both with their respective Frames and Single Light Bases, are shown at right. |

H x W x D
|
| EU1000i Generator, Frame & Single Light Base |
19.5 x 13.75 x 23.25 |
| EU2000i Generator, Frame & Single Light Base |
21 x 14.75 x 27.25 |
| EU2000i Generator, Frame & Dual Light Base |
21 x 16.25 x 27 |
DIMENSIONS OF POLELIGHTS
| |
Shortest Length* |
Depth of Light Head* |
Width |

650W lights folded to their Shortest Length |
650W Fixed |
N/A |
7.75 inches |
10.5 inches |
650W standard
|
19.75 inches |
7.75 inches |
10.5 inches |
650W XT
|
43.5 inches |
7.75 inches |
10.5 inches |
| 2-Headed XT |
51 inches
(The two heads on this polelight do not fold forward much at all) |
7 inches |
22.5 inches |
| 1500W standard |
20 inches |
6.5 inches |
16.5 inches |
| 1500W XT |
43.25 inches |
6.5 inches |
16.5 inches |
* Note: Shortest Length is measured with the pole retracted to its shortest length and the light head(s) folded forward as pictured above. Depth of Light Head measurements are of the light itself, taken with the light straight up. If your storage compartment is tight, please call us to make sure the polelight will fit.
WEIGHT
Complete LENTRY® Units include a Generator, Frame, Light Base and Light(s). There are three generators, two light bases, and five polelights from which to choose, depending on your power, light, and storage needs.
Once you know which combination you want, add the weights of the components below. Weights are approximate.
|
|
GENERATOR AND FRAME (LEGS)
| Honda EU1000i and Frame |
36.5 lbs. |
Generator is 29 lbs and Frame is 7.4 lbs. Fuel and oil add 4.2 lbs
|
| Honda EU2000i and Frame |
55.5 lbs. |
Generator is 47 lbs and Frame is 8.3 lbs. Fuel and oil will add 7.5 lbs.
|
LIGHT BASE
| Single Light Base for an EU1000i unit |
4 lbs. |
| Single Light Base for an EU2000i unit |
4.5 lbs. |
| Dual Light Base |
7.3 lbs. |
LIGHTS / POLELIGHTS
| 650W fixed |
8.5 lbs. |
| 650W standard height |
13 lbs. |
| 650W XT (extra tall) |
15 lbs. |
| 1500W standard height |
13 lbs. |
| 1500W XT |
14 lbs. |
| Two-Headed XT |
20 lbs. |
| Dual Lights |
Add the weight of two 650W lights from above; either two standard, two XT, or one of each |
See also...
Generator Specs page
Lights page
Warranty page
Top of Page
|